正交相MoO3的制备、表征及其电化学嵌锂性质

用化学沉淀-水热法在较低的温度下制备了片状正交相MoO3,由XRD、FT-IR、XPS和SEM表征了产物的相态、结构、成分和形貌。电化学测试表明,在0.1mA.cm-2的电流密度和1.2~3.5V电压范围,其初始放电容量为663mA.h.g-1,有望成为理想的锂离子插层材料。     

Donor-acceptor properties, catalytic activity, and negative charge exoemission from the alumina surface modified with lithium cations

Donor-acceptor properties of alumina modified with lithium cations were studied by ESR of paramagnetic complexes of adsorbed anthraquinone. The results were compared with the data on negative ion emission (exoemission) accompanying the decomposition of isopropyl alcohol in the adsorption layer. The data on the activity measured by the pulse microcatalytic technique in isopropyl alcohol decomposition are discussed. Small additives of lithium were found to promote catalytic activity of the samples. The role of acid and basic sites in isopropyl alcohol decomposition was discussed. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 616–621, April, 2006.     

熔融浸渍法制备锂离子电池正极材料LiMn2O4的研究

采用LiNO3和MnO2为原料,在650℃下制备了尖晶石型的LiMn2O4.通过X射线衍射、扫描电子显微镜、热重分析和电化学性能测试,发现该化合物具有很高的放电比容量和较好的循环性能,首次放电比容量可达到122 mA·h/g.并对循环性能衰减的各种因素进行了讨论.     

Improvement of basic performances of a nickel-metal hydride battery

To develop a sealed-type nickel-metal hydride battery for use in portable equipment or in electric vehicles, investigations were conducted on negative electrodes using AB₅-type hydrogen storage alloy and positive electrodes. For the cycle life performance of the battery, alkaline treatment of the alloy and the substitution of more than 50% to the alloy with Co were effective. For the positive electrode, zinc as a solid solution in the nickel positive electrode obviously prevented γ-NiOOH from being formed in the charging process of β-Ni(OH)₂ and suppressed the migration of the electrolyte solution in the separator to the active material of the positive electrode. Also, hydrophobic treatment of the surface of the alloy was effective to prevent the elevation of the battery internal pressure of the battery in high rate charge.     

尖晶石锂锰氧化物锂离子嵌脱过程的交流阻抗谱研究

用粉末微电极研究了尖晶石锂锰氧化物在不同嵌锂状态下嵌脱锂过程的交流阻 抗图谱，提出了新的等效电路模型。描述锂离子在固体中扩散的Warburg阻抗与累 积或消耗的嵌入电容在Lix MnO4中的x≤0．5时串联，0．5＜x≤1时并联。用提出 的等效电路模型分阶段拟合了实验所得的交流阻抗谱，拟合值与实验值相当吻合， 由拟合结果得到不同电位下锂离子在表面膜中的迁移电阻和电容，界面电荷传递电 阻，双层电容，锂离子在固体中扩散系数和累积或消耗的嵌入电容。     

泡沫铅对VRLA电池负极活性物质结构及性能影响

0引言随着36V/42V汽车电源系统的提出,新一轮汽车用电池的竞争不断加剧。从目前情况看,铅酸电池由于具有成本低廉,使用可靠,原材料来源丰富,铅回收率可高达98%等优点,因此成为电动车电源最实际的选择之一[1]。但作为电动车用电池,需要克服其比能量低、充电接受能力差和负极硫酸盐化等缺点。为此各国科学家开展了大量的研究工作。最近报道用铸造多孔体作为敞口铅酸电池的集流体,它的比表面积为14cm2·cm-3,正极活性物质利用率上升到50%,远高于传统的铸造板栅[2]。在铅酸电池集流体研究领域里另一个重大进步,就是以R V C(R etic-ulated V i…     

四元交互体系Li~＋，Mg~（2＋）／Cl~－，SO_4~（2－）－H_2O

本文采用等温溶解平衡法研究了四元交互体系Ｌｉ＋，Ｍｇ２＋／ＣＩ－，ＳＯ－Ｈ２Ｏ２５℃的机关系和平衡液相的物化性质（密度、粘度、电导率、折光率和ｐＨ）．该体系２５℃有七个相区Ｌｉ２ＳＯ４·Ｈ２Ｏ，ＭｇＳＯ４·７Ｈ２Ｏ．ＭｇＳＯ４·６Ｈ２Ｏ．ＭｇＳＯ４·５Ｈ２Ｏ，ＭｇＣ１２，６Ｈ２Ｏ，ＬｉＣＩ．ＭｇＣｌ２．７Ｈ２Ｏ，ＬｉＣＩ·Ｈ２Ｏ，十一条单变量线，五个共饱点．其中ＬｉＣＩ·Ｈ２Ｏ＋ＬｉＣＩ·ＭｇＣｌ２·７Ｈ２Ｏ＋Ｌｉ２ＳＯ４·Ｈ２Ｏ为一致零变量点．与文献中的研究结果比较，我们得到两个新相区ＭｇＳＯ４·６Ｈ２Ｏ和ＭｇＳＯ４·５Ｈ２Ｏ．用经验和半经验公式计算了平衡液相的密度、折光率．由实验测定的溶解度数据求得了高锂浓度下的Ｐｉｔｚｅｒ参数．对该体系２５℃溶解度进行了理论计算复证．     

Nontrivial structural organization of pivalate complexes with the fragment {Fe2Li(μ3-O)}

1. Download : Download high-res image (228KB)
2. Download : Download full-size image

     

Structural and electrochemical studies of annealed LiNiVO4 thin films

We prepared stoichiometric lithium nickel vanadate amorphous thin films by using r.f. magnetron sputtering under controlled oxygen partial pressure. The amorphous films were heated at various temperatures, 300–600 °C, for 8 h. The as‐deposited and annealed thin films were characterized by Rutherford backscattering spectroscopy, nuclear reaction analysis, Auger electron spectroscopy, X‐ray diffraction, scanning electron microscopy and atomic force microscopy. The electrochemical behavior of the various films was studied by the galvanostatic method. The cells were tested in a liquid electrolyte at room temperature, with lithium metal used as the counter and reference electrode. The best electrochemical storage value was obtained with the thin film annealed at 300 °C, which showed superior capacity and small capacity loss during cycling. Copyright © 2007 John Wiley & Sons, Ltd.     

层状LiMnO_2的溶胶凝胶法合成及其改性

采用溶胶凝胶法合成了锂离子电池正极材料层状锰酸锂(o-L iMnO2),并对其进行了N i2+掺杂改性研究,优化了层状L iMnO2的合成路径及制备条件.采用XRD、充放电实验和交流阻抗测试方法研究了N i2+的掺入对o-L iMnO2充放电容量的影响.结果表明N i2+的掺入明显提高了锰酸锂的放电比容量和循环性能,抑制了循环过程中电池阻抗的增加.